One of the most common questions I receive is… “Is my engine an interference engine, and when should I change my timing belt?”

First some background… Most modern engines today are overhead cam engines, which require a long belt or sometimes a chain to drive the camshaft. The belt or chain runs from the crankshaft to the camshaft located above the cylinder head. Many times the belt or chain runs the water pump also to save space and having to run any extra belt. Timing chains require little maintenance and wear very well, but are not very common in today’s cars. Timing belts are quiet, cheaper to manufacturer and do not require lubrication like a chain, so most new car manufacturers are using them. The draw back is that they do not last as long as a chain and often need to be changed every 60,000 – 80,000 miles.

Now onto the big issue, Interference Engines… If your timing belt breaks, the engine will continue to turn, but the camshaft stops. If any of the valves are open, and your engine is an interference engine, the piston will slam into the open valve and cause some real expensive damage. Most modern engines are built with very close tolerances, and to squeeze every last bit of power into a small package, engine manufacturers sometimes create issues with clearances. The easiest way to find out if your engine is an interference engine, is to look at the following guide published by Gates, a manufacturer of timing belts. They include the replacement interval and whether you engine is an interference engine or not.