Auto Repair Advice

Getting a car loan with bad credit can be difficult and often times costs you tons of money in high interest rates. If you are in debt and need a solution, check out www.debtzine.com for some excellent advice. Below are some tips on how to relieve your debt.

Consumers overwhelmed by debt may feel that there is no place to turn and feel compelled to rush to bankruptcy to eliminate their debt. However, there are many alternatives available such as debt consolidation, debt settlement, as well as debt consolidation loans, home equity loans or even personal loans, that may provide better alternatives.

The first step a consumer must take to resolve their financial difficulties is to truthfully and fully assess their financial situation. Many consumers are unable or unwilling to come to terms with every relevant detail of their particular financial situation. For those of you, there are many consumer credit counseling and debt settlement organizations who can provide needed advice. One such organization on our favorite list is www.DebtXS.com You can click here to fill out a quick one minute form and they will contact you with some recommended options tailored to your situation.

These organizations will ask you the appropriate questions needed to obtain information from the consumer to plan a debt relief strategy. Such information includes:

- Number of debts
- Total dollar amount of debts
- Description/types of debt (i.e. secured vs. unsecured)
- Consumer’s attitude toward debt
- Description of assets
- Debtor’s income
- Any pending legal actions

Answering the above honestly and completely will allow the consumer debt counseling agency or debt consolidator to propose an appropriate remedy. Some agencies may provide credit repair services.

Read more at www.debtzine.com

Good Luck,

Kevin Schappell

I would like to extend a special offer to you today. We have all seen the TV commercials for online car insurance quotes, but for us guys who drive classic cars, most quote websites don’t work ! The typical classic car insurance companies like Hagerty and JC Taylor sell insurance through brokers and rarely write classic car insurance policies directly.

I have found a great site which handles classic and collector car insurance quotes (as well as newer cars) and will find you the best rate. They cover 1941 to present cars.

Click Below to get your quote today FREE !

https://www.insureme.com

Do you know the best way to get a low cost car insurance policy? Besides having a good driving record, your best bet for low cost car insurance is to shop around for the best price. I found a great company who will shop your insurance needs to multiple companies and find an agent in your area to give you the best service. Click below to get a quote online.

https://www.insureme.com

Question:
It’s a lovely site and easy to understand for people who are not mechanically inclined. My garageman said one of the pistons is cracked and therefore he must change all the pistons. Is that true? Why not just change the one that’s cracked?

Thank you,
Mrs. A

Answer:
It is general practice to change all the pistons at once. If one piston is cracked, there is a good chance the others will crack in short time. When replacing the piston, the cylinder walls sometime need to be remachined, and at least honed, to allow the new rings to seat. It is important for the rings to seat properly or your engine will not have good compression and may burn oil. The labor to replace one piston or all of them is not much more, and the pistons are generally purchased in sets, so his advice to replace all pistons is good.

Kevin

I have been recommending AllData for years here at AutoEducation.com. It’s a great way to get the repair information you need, or just learn more about your car. They offer TSB’s (Technical service bulletins) Recall Information and Labor guides, so you know how long your mechanic should be taking to fix your vehicle.

Did you know they have a Free test drive, where you can try out their online repair manual and see the quality of the information contained in it? Check out AllData today and see why I believe in it and recommend it to all my visitors.

We are excited to announce that we will be selling
the Road
Machines software to help you learn more about your car and how it works.
This program has excellent full color cut-away pictures as well as easy-to-read
text. Topics include maintenance, computer systems, parts, and troubleshooting.

Even if you don’t work on your own car, you will benefit
from this CD. It will give you a good overview of how your car works and
will help to protect you from a less than honest mechanic. You can download
a Demo or check out our FREE
Preview online.

Kevin

Dear Kevin,

I am a Los Angeles Superior Court Mediator and I was hoping that you could help me with a technical question I have regarding a case I am hearing?

The case involves a litigant who took his car in for a 7-10 point check and a regular oil change (this being done before a long weekend driving trip). The party picked up his car, drove about 10 miles to his home and packed up the car and then drove on the freeway about another 20 miles until the car died. Knowing a little about cars, he checked the oil and it was bone dry, he proceeded to purchase 5 qts of oil and put it into the car, which took all 5 quarts. He then tried to start/run the car to no avail. Then had it towed and filed suit with our court.

My understanding is that the car would not have made it 1-2 miles without oil, not 30+? Is this true. It was also a cool evening (if that matters).

The car is a 1977 Pontiac LeMans (a classic and am told not many were made). The plaintiff also had the engine rebuilt just 5 months prior and it seems now, with some of the testimony I have in, that the engine needs to be rebuilt again.

Does any of this sound correct to you? I respect your opinion. The trial is Thursday so time is of the essence.

Thank you.

Respectfully,

Peggy R.
Court Mediator

Answer:

There are three possibilities that may have caused this situation…

1. The oil filter was not tightened properly and the oil slowly leaked out or

2. the gasket from the old oil filter was left on the engine, and when the new filter was installed, it caused a leak due to having two gaskets instead of one.

3. The drain plug was not tightened and fell out a few minutes before the engine seized. Any of the scenarios should be able to be proved by inspecting the underside of the engine looking for fresh oil indicating a leak, or a missing drain plug.

If the shop forgot to put oil in the engine, the car would not have made it more than a mile.

When doing an oil change, the mechanic should start the car, check for proper oil pressure (either on the oil pressure guage if installed, or by the absense of the oil pressure warning light) and check for leaks. Then check oil level after the engine has run for a minute or two.

Unfortunetly I have heard way to many stories of loose drain plugs, or loose oil filters from quick lube shops.

Take Care,

Kevin Schappell

Question:

Hi Kevin,

Your web site is fabulous – I googled “car washing” and your site was in the top three that came up. I have just spent 40 minutes reading through your various pages – great information.

Here is my question. I have a 2005 Fire Red Mustang, that just got its first wash after a few months of winter driving (I know, very bad to wait so long!). It is a lovely spring day in Vancouver and so I washed all the grime off my car. Some of the black tar like grime was very stubborn, and so I used the abrasive side of one of those two sided dish washing sponges to give them a good scrub. Not so clever as I discovered after I dried the car, now I can see whitish scuff like hazing in the paint where I did this.

I am hoping that all I did was scrub off the wax. I intend to leave the car in the garage over night to completely dry, and then wax it tomorrow – do you think this will remove those nasty scrub marks?

I hope I haven’t ruined my paint.

Thanks for your help.

Sandy

Answer:

Sandy,

You probably scratched the clear coat, which can be fixed. I would take it to a body shop and have them look at it, as it’s not an easy job for the beginner. They will probably use a cutting compound to smooth out the scratches, and then polish it to bring back the shine. I would not tackle the job yourself, as you may break through to the base color, then the only way to get the shine back, would be to respray the clear coat.

Good Luck,

Kevin

Question:

The gas door and cap were accidentally left open when going through a car wash. The tank had just been filled up and it looks like there is a metal door that is closed unless a fuel pump is inserted. What problems may occur and is there something that should be done?

Karen

Answer:

Karen,

I would put a bottle of “Dry Gas” or similar gas line treatment that removes water, into the tank immediately. The alcohol in the treatment removes the water from the gas tank. If you experience sputtering, or poor performance after the treatment, I would have the tank flushed at your mechanic. More than likely, not much water entered, since the tank was full, and the flap in the filler neck should have prevented some of the water from getting in.

Kevin

Question:

There’s a good chance I have to replace my valve seals on my ‘98 Jeep GC - 5.9 since I am using up 5 qts of oil in about 4-5 mos, no leaks nor smoke except at start-up. How much damage am I causing by not repairing it ASAP ?

How much does a repair like this cost ? Am I better off going to a dealership or a private mechanic ? Everyone knows dealerships will charge an arm and a leg and your 1st born.

Thanks for taking the time to answer.

Regards,

Tom

Answer:

As long as you keep the oil level up, I would not be too worried about the damage being done to the engine. You may be wearing out the spark plugs a little sooner due to having to burn that oil and the deposits left on the plug. I would estimate between 4 and 8 hours of labor depending on how involved it is to get to the seals. If it is an overhead cam engine, expect a little more time, but I believe the 5.9 is a V-8 with the camshaft in the block. The seals themselves are usually very cheap and the expense of the job is mostly in the labor.

Good Luck,

Kevin